A flooring installer kneeling to lay wide oak planks across a sunlit room

5 near you

Find hardwood floor refinishing in Minneapolis

Confirm your location to see pros near you.

Hardwood Floor Refinishing pros near you

5 hardwood floor refinishing pros serving Minneapolis, MN. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. Floors with Hart

Minneapolis, MN26 years in business2 employees

Floors with Hart provides hardwood floor refinishing in Minneapolis, MN. The business has been operating for 26 years with a team of 2. Before any sanding in Minneapolis, furniture comes out, adjoining rooms are sealed off, and dust containment goes up. After sanding and vacuuming, stain and finish coats go down with drying between each, and the rooms stay off limits until the finish has cured. Common requests for hardwood floor refinishing include refinishing floors found under old carpet, water damage board repair, carpet adhesive residue removal, pet stain board replacement and oil-based polyurethane finish. Dark pet stains, boards that feel rough underfoot, and a dull finish that cleaning no longer brightens suggest a sand or recoat. Describe the current finish and color, the look you want, and any boards with deep stains, cracks, or water damage. Buff and recoat jobs cost less than full sanding, while color changes, pet stain repairs, and furniture moving add to the total. Customers in Minneapolis and nearby areas such as Burnsville, Bloomington and Savage can request a quote. Posted hours are Monday to Friday, 8:00 am to 5:00 pm. Accepted payment methods include Cash, Check, Credit card and Venmo. Request a quote from Floors with Hart on Fixerlane and describe the job you need done.

2. S&S Hardwood and Flooring

Minneapolis, MN12 years in business4 employees

Based in Minneapolis, MN, S&S Hardwood and Flooring works as a floor refinishing contractor. A team of 4, the business has been operating for 12 years. Not every floor needs a full sand. Floors with light surface wear can often be buffed and recoated, while deep scratches, gray water damage, or a color change call for sanding to bare wood. Damaged boards may be replaced and blended in before finishing. Typical jobs for hardwood floor refinishing in Minneapolis include buffing out surface scratches, stair tread refinishing, water-based polyurethane finish, buff and recoat and gap filling between boards. S&S Hardwood and Flooring is also listed for finish carpentry. Gray or bare spots in traffic areas, deep scratches, and a finish that no longer repels water are common signs floors need refinishing. Mention pets, when the rooms can be fully emptied, and whether you prefer a water-based or oil-based finish, if known. Cost depends on square footage, floor condition, whether stain is applied, the number of finish coats, and any board repairs or stairs. Customers in Minneapolis and nearby areas such as Burnsville, Bloomington and Savage can request a quote. Accepted payment methods include Cash, Check, Credit card, PayPal, Venmo and Zelle. To get started, send S&S Hardwood and Flooring a request on Fixerlane with the details of your project.

3. GIGU Remodeling LLC

Minneapolis, MN8 years in business

GIGU Remodeling LLC provides hardwood floor refinishing in Minneapolis, MN. It has been in business for 8 years. Refinishing restores worn hardwood by sanding away the old finish and surface damage, then applying stain if desired and several coats of protective finish. The result is a floor that looks new without replacing boards, since solid hardwood can usually be sanded multiple times over its life. Common requests for hardwood floor refinishing include buff and recoat, water-based polyurethane finish, stain color change, buffing out surface scratches and carpet adhesive residue removal. GIGU Remodeling LLC is also listed for exterior painting, handyman, interior painting and pressure washing. Dark pet stains, boards that feel rough underfoot, and a dull finish that cleaning no longer brightens suggest a sand or recoat. Mention pets, when the rooms can be fully emptied, and whether you prefer a water-based or oil-based finish, if known. Cost depends on square footage, floor condition, whether stain is applied, the number of finish coats, and any board repairs or stairs. Customers in Minneapolis and nearby areas such as Burnsville, Bloomington and Savage can request a quote. Accepted payment methods include Cash, Check, Venmo and Zelle. To get started, send GIGU Remodeling LLC a request on Fixerlane with the details of your project.

4. Smf remodeling LLc

Minneapolis, MN3 years in business

Based in Minneapolis, MN, Smf remodeling LLc works as a hardwood floor refinisher. It has been in business for 3 years. Before any sanding in Minneapolis, furniture comes out, adjoining rooms are sealed off, and dust containment goes up. After sanding and vacuuming, stain and finish coats go down with drying between each, and the rooms stay off limits until the finish has cured. Common requests for hardwood floor refinishing include water-based polyurethane finish, refinishing floors found under old carpet, stair tread refinishing, buff and recoat and pet stain board replacement. Smf remodeling LLc is also listed for carpet installation and countertop installation. Dark pet stains, boards that feel rough underfoot, and a dull finish that cleaning no longer brightens suggest a sand or recoat. Describe the current finish and color, the look you want, and any boards with deep stains, cracks, or water damage. Buff and recoat jobs cost less than full sanding, while color changes, pet stain repairs, and furniture moving add to the total. Customers in Minneapolis and nearby areas such as Burnsville, Bloomington and Savage can request a quote. To get started, send Smf remodeling LLc a request on Fixerlane with the details of your project.

5. Floor Coverings International of Bloomington

Minneapolis, MN

Floor Coverings International of Bloomington is a hardwood floor refinisher serving Minneapolis, MN. Not every floor needs a full sand. Floors with light surface wear can often be buffed and recoated, while deep scratches, gray water damage, or a color change call for sanding to bare wood. Damaged boards may be replaced and blended in before finishing. Common requests for hardwood floor refinishing include oil-based polyurethane finish, water-based polyurethane finish, carpet adhesive residue removal, stain color change and gap filling between boards. Floor Coverings International of Bloomington is also listed for carpet installation and countertop installation. Homeowners often refinish when uncovering hardwood under old carpet, changing the floor color, or preparing a house for sale or new occupants. Share the square footage of each room, photos of the worn areas, and whether stairs or landings are included in the project. Cost depends on square footage, floor condition, whether stain is applied, the number of finish coats, and any board repairs or stairs. Besides Minneapolis, homeowners in Burnsville, Bloomington and Savage can reach out for hardwood floor refinishing. To get started, send Floor Coverings International of Bloomington a request on Fixerlane with the details of your project.

Hardwood Floor Refinishing elsewhere

Long Branch, NJ (30)Bridgeport, CT (23)Denver, CO (15)Charlotte, NC (13)Chicago, IL (12)Philadelphia, PA (11)Marietta, GA (10)Newark, NJ (9)

Other services in Minneapolis

Cleaning (219)Handyman (122)Moving & Junk Removal (74)Roofing & Exterior (67)Landscaping & Lawn Care (66)Painting (60)Construction & Contracting (43)Flooring (34)Remodeling & Carpentry (31)Masonry & Concrete (24)Property Services (19)Plumbing (16)