A flooring installer kneeling to lay wide oak planks across a sunlit room

15 near you

Find flooring in Asheville

Confirm your location to see pros near you.

Flooring pros near you

15 flooring pros serving Asheville, NC. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. Benjamin’s Tile & Construction

Asheville, NC18 years in business5 employees

Benjamin’s Tile & Construction is a tile contractor serving Asheville, NC. A team of 5, the business has been operating for 18 years. Good tile starts under the surface. In wet areas, the installer uses cement backer board and a waterproofing layer before setting any tile. On floors, the base is checked for flex and flatness so tiles and grout lines do not crack later, and large-format tile gets extra attention to lippage. Typical jobs for tile installation in Asheville include kitchen backsplashes, bathroom floor tile, entryway tile floors, cracked tile replacement and tile over cement backer board. Benjamin’s Tile & Construction is also listed for cabinet installation, handyman and interior painting. Kitchen or bath remodels, a dated backsplash, or a switch from carpet to a hard floor in an entry or mudroom commonly lead homeowners to hire a tile setter. Share room dimensions, the tile size and material chosen, and photos of the current surface. Note whether old tile must be removed before new work begins. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for tile installation. Accepted payment methods include Apple Pay, Cash, Check, PayPal, Venmo and Zelle. Request a quote from Benjamin’s Tile & Construction on Fixerlane and describe the job you need done.

2. Royal Pine flooring llc

Asheville, NC18 years in business2 employees

Based in Asheville, NC, Royal Pine flooring llc works as a floor refinishing contractor. The business has been operating for 18 years with a team of 2. Before any sanding in Asheville, furniture comes out, adjoining rooms are sealed off, and dust containment goes up. After sanding and vacuuming, stain and finish coats go down with drying between each, and the rooms stay off limits until the finish has cured. Common requests for hardwood floor refinishing include buff and recoat, stain color change, gap filling between boards, water damage board repair and sanding and refinishing oak floors. Royal Pine flooring llc is also listed for cabinet installation, carpet installation, countertop installation and exterior painting. Homeowners often refinish when uncovering hardwood under old carpet, changing the floor color, or preparing a house for sale or new occupants. Describe the current finish and color, the look you want, and any boards with deep stains, cracks, or water damage. Buff and recoat jobs cost less than full sanding, while color changes, pet stain repairs, and furniture moving add to the total. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Accepted payment methods include Cash, Check and Zelle. Request a quote from Royal Pine flooring llc on Fixerlane and describe the job you need done.

3. McCarty Tile and Stone

Asheville, NC13 years in business

McCarty Tile and Stone is a tile contractor serving Asheville, NC. It has been in business for 13 years. Good tile starts under the surface. In wet areas, the installer uses cement backer board and a waterproofing layer before setting any tile. On floors, the base is checked for flex and flatness so tiles and grout lines do not crack later, and large-format tile gets extra attention to lippage. Typical jobs for tile installation in Asheville include tile over cement backer board, shower wall tile, shower niche installation, kitchen backsplashes and mosaic accent walls. McCarty Tile and Stone is also listed for furniture assembly and interior painting. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Mention whether tile is already purchased, the planned height of wall tile, and whether the floor is a concrete slab or wood framing. Showers and mosaics take more time than open floors. Natural stone sealing, custom niches, and many cuts around fixtures and outlets raise the price. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Posted hours are Monday to Friday, 8:00 am to 7:00 pm. Accepted payment methods include Cash, Check, Credit card, Venmo and Zelle. To get started, send McCarty Tile and Stone a request on Fixerlane with the details of your project.

4. Carolina tile and remodel

Asheville, NC9 years in business2 employees

Based in Asheville, NC, Carolina tile and remodel works as a tile contractor. The business has been operating for 9 years with a team of 2. Tile work covers floors, walls, backsplashes, and showers. The installer prepares a flat, stable substrate, lays out the pattern to balance cuts at each wall, sets tile in thinset mortar, and finishes with grout and flexible caulk at inside corners and changes of plane where movement happens. On their profile, Carolina tile and remodel lists tile type: ceramic, porcelain, natural stone and mosaic. Hollow sounds when tapping a tile floor or mold along grout lines in a shower often mean the installation underneath needs attention. Include the layout pattern, such as straight, offset, or herringbone, and details like niches, benches, curbless entries, or trim pieces for showers. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Accepted payment methods include Cash, Check, Square cash app and Zelle. Request a quote from Carolina tile and remodel on Fixerlane and describe the job you need done.

5. B&L REMODELING LLC

Asheville, NC7 years in business3 employees

B&L REMODELING LLC is a hardwood flooring contractor serving Asheville, NC. A team of 3, the business has been operating for 7 years. Homeowners choose between solid hardwood, which can be sanded many times, and engineered boards, which handle basements and concrete slabs better. The installer helps match product to the space, lets the wood acclimate inside the home, and plans layouts that avoid awkward slivers at doorways and hallways. Typical jobs for hardwood floor installation in Asheville include herringbone pattern floors, baseboard and shoe molding reinstall, transition strips and thresholds, engineered hardwood over concrete and subfloor leveling. Worn carpet, damaged laminate, or a planned sale often prompts a switch to hardwood, especially in living rooms, hallways, and bedrooms that see daily foot traffic. Photos of each room, the chosen wood species or product, and whether furniture moving and old floor removal are needed help an installer quote accurately. Removal and disposal of old flooring, furniture moving, and trim work affect the total, along with the number of rooms, closets, and cuts involved. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for hardwood floor installation. Accepted payment methods include Cash, Check and Zelle. Request a quote from B&L REMODELING LLC on Fixerlane and describe the job you need done.

6. Raplee's Tile & More

Asheville, NC7 years in business

Based in Asheville, NC, Raplee's Tile & More works as a tile contractor. The business has been operating for 7 years. Tile work covers floors, walls, backsplashes, and showers. The installer prepares a flat, stable substrate, lays out the pattern to balance cuts at each wall, sets tile in thinset mortar, and finishes with grout and flexible caulk at inside corners and changes of plane where movement happens. Typical jobs for tile installation in Asheville include entryway tile floors, tile over cement backer board, kitchen backsplashes, shower wall tile and shower niche installation. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Share room dimensions, the tile size and material chosen, and photos of the current surface. Note whether old tile must be removed before new work begins. Showers and mosaics take more time than open floors. Natural stone sealing, custom niches, and many cuts around fixtures and outlets raise the price. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Accepted payment methods include Apple Pay, Cash, Check, Credit card, PayPal and Stripe. Request a quote from Raplee's Tile & More on Fixerlane and describe the job you need done.

7. Infinity Flooring LLC

Asheville, NC5 years in business4 employees

Infinity Flooring LLC provides hardwood floor refinishing in Asheville, NC. The business has been operating for 5 years with a team of 4. Refinishing restores worn hardwood by sanding away the old finish and surface damage, then applying stain if desired and several coats of protective finish. The result is a floor that looks new without replacing boards, since solid hardwood can usually be sanded multiple times over its life. Typical jobs for hardwood floor refinishing in Asheville include buffing out surface scratches, buff and recoat, border and inlay refinishing, carpet adhesive residue removal and gap filling between boards. Dark pet stains, boards that feel rough underfoot, and a dull finish that cleaning no longer brightens suggest a sand or recoat. Share the square footage of each room, photos of the worn areas, and whether stairs or landings are included in the project. Cost depends on square footage, floor condition, whether stain is applied, the number of finish coats, and any board repairs or stairs. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Posted hours are Monday to Saturday, 9:00 am to 6:00 pm. Accepted payment methods include Cash, Check, Venmo and Zelle. Request a quote from Infinity Flooring LLC on Fixerlane and describe the job you need done.

8. Sk Quality Construction LLC

Asheville, NC5 years in business

Based in Asheville, NC, Sk Quality Construction LLC works as a tile contractor. The business has been operating for 5 years. Tile work covers floors, walls, backsplashes, and showers. The installer prepares a flat, stable substrate, lays out the pattern to balance cuts at each wall, sets tile in thinset mortar, and finishes with grout and flexible caulk at inside corners and changes of plane where movement happens. Typical jobs for tile installation in Asheville include shower wall tile, cracked tile replacement, tile over cement backer board, large-format porcelain floors and entryway tile floors. Sk Quality Construction LLC is also listed for hardwood floor refinishing. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Share room dimensions, the tile size and material chosen, and photos of the current surface. Note whether old tile must be removed before new work begins. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Request a quote from Sk Quality Construction LLC on Fixerlane and describe the job you need done.

9. FCI Floors - Western North Carolina

Asheville, NC4 years in business5 employees

FCI Floors - Western North Carolina is a hardwood floor installer serving Asheville, NC. The business has been operating for 4 years with a team of 5. Expect furniture to be moved, old flooring pulled, and the subfloor fixed where it squeaks or dips. Installation then moves room by room, with cuts around vents and door casings, followed by thresholds, stair nosing, and molding for a clean finished edge where the floor meets other surfaces. Typical jobs for hardwood floor installation in Asheville include floating hardwood floors, subfloor leveling, old carpet removal before install, solid oak plank installation and nail-down floors over plywood subfloors. FCI Floors - Western North Carolina is also listed for carpet installation and hardwood floor refinishing. Worn carpet, damaged laminate, or a planned sale often prompts a switch to hardwood, especially in living rooms, hallways, and bedrooms that see daily foot traffic. Photos of each room, the chosen wood species or product, and whether furniture moving and old floor removal are needed help an installer quote accurately. Wood species, plank width, and solid versus engineered construction set the material cost. Subfloor repair, stairs, and pattern layouts like herringbone add labor. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for hardwood floor installation. Accepted payment methods include Cash, Check, Credit card, PayPal and Venmo. Request a quote from FCI Floors - Western North Carolina on Fixerlane and describe the job you need done.

10. My Project LLC

Asheville, NC3 years in business3 employees

Based in Asheville, NC, My Project LLC works as a tile contractor. A team of 3, the business has been operating for 3 years. Good tile starts under the surface. In wet areas, the installer uses cement backer board and a waterproofing layer before setting any tile. On floors, the base is checked for flex and flatness so tiles and grout lines do not crack later, and large-format tile gets extra attention to lippage. Typical jobs for tile installation in Asheville include shower wall tile, shower niche installation, tile over cement backer board, entryway tile floors and fireplace surrounds. Hollow sounds when tapping a tile floor or mold along grout lines in a shower often mean the installation underneath needs attention. Include the layout pattern, such as straight, offset, or herringbone, and details like niches, benches, curbless entries, or trim pieces for showers. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for tile installation. Accepted payment methods include Apple Pay, Cash, Credit card, Google Pay and Zelle. To get started, send My Project LLC a request on Fixerlane with the details of your project.

11. ARTIKON LLC

Asheville, NC3 years in business

ARTIKON LLC provides tile installation in Asheville, NC. It has been in business for 3 years. A tile job in Asheville usually begins with measuring and choosing a layout, then demolition of old surfaces down to a sound base. Tile is set, left to cure, grouted, and cleaned. Trim pieces, edge profiles, and sealing of natural stone or cement grout complete the job. On their profile, ARTIKON LLC lists tile type: ceramic, porcelain, natural stone and mosaic. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Include the layout pattern, such as straight, offset, or herringbone, and details like niches, benches, curbless entries, or trim pieces for showers. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for tile installation. Accepted payment methods include Cash, Check, Stripe and Zelle. Request a quote from ARTIKON LLC on Fixerlane and describe the job you need done.

12. Mikes Demolition and Renovation

Asheville, NC2 years in business3 employees

Mikes Demolition and Renovation provides tile installation in Asheville, NC. A team of 3, the business has been operating for 2 years. A tile job in Asheville usually begins with measuring and choosing a layout, then demolition of old surfaces down to a sound base. Tile is set, left to cure, grouted, and cleaned. Trim pieces, edge profiles, and sealing of natural stone or cement grout complete the job. Common requests for tile installation include entryway tile floors, bathroom floor tile, cracked tile replacement, tile over cement backer board and fireplace surrounds. Mikes Demolition and Renovation is also listed for furniture assembly, handyman, interior painting and junk removal. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Include the layout pattern, such as straight, offset, or herringbone, and details like niches, benches, curbless entries, or trim pieces for showers. Showers and mosaics take more time than open floors. Natural stone sealing, custom niches, and many cuts around fixtures and outlets raise the price. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for tile installation. Accepted payment methods include Cash, Check, PayPal and Zelle. Request a quote from Mikes Demolition and Renovation on Fixerlane and describe the job you need done.

13. MM Tile Installer

Asheville, NC2 years in business

MM Tile Installer is a hardwood flooring contractor serving Asheville, NC. It has been in business for 2 years. Expect furniture to be moved, old flooring pulled, and the subfloor fixed where it squeaks or dips. Installation then moves room by room, with cuts around vents and door casings, followed by thresholds, stair nosing, and molding for a clean finished edge where the floor meets other surfaces. Common requests for hardwood floor installation include unfinished floors finished on site, subfloor leveling, baseboard and shoe molding reinstall, wide-plank flooring and floating hardwood floors. Allergies, pets, or a desire for a floor that can be sanded and refinished later lead many homeowners to replace soft flooring with real wood. Photos of each room, the chosen wood species or product, and whether furniture moving and old floor removal are needed help an installer quote accurately. Removal and disposal of old flooring, furniture moving, and trim work affect the total, along with the number of rooms, closets, and cuts involved. Besides Asheville, homeowners in Arden, Fletcher and Swannanoa can reach out for hardwood floor installation. Accepted payment methods include Cash, Check, Credit card, Square cash app and Zelle. Request a quote from MM Tile Installer on Fixerlane and describe the job you need done.

14. Jewel of the Tile

Asheville, NC1 year in business

Based in Asheville, NC, Jewel of the Tile works as a tile installer. It has been in business for 1 year. A tile job in Asheville usually begins with measuring and choosing a layout, then demolition of old surfaces down to a sound base. Tile is set, left to cure, grouted, and cleaned. Trim pieces, edge profiles, and sealing of natural stone or cement grout complete the job. Typical jobs for tile installation in Asheville include mosaic accent walls, cracked tile replacement, regrouting, entryway tile floors and shower niche installation. Jewel of the Tile is also listed for handyman and interior painting. Cracked or loose tiles, crumbling grout, or water getting behind a shower wall are signs that tile needs repair or replacement before the damage spreads. Mention whether tile is already purchased, the planned height of wall tile, and whether the floor is a concrete slab or wood framing. Tile size, material, and pattern complexity drive labor on most tile jobs. Demolition, waterproofing, and substrate repair add to the scope and the price. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. Posted hours are Monday to Friday, 8:00 am to 5:00 pm. Accepted payment methods include Check and PayPal. Request a quote from Jewel of the Tile on Fixerlane and describe the job you need done.

15. Simon flooring

Asheville, NC

Simon flooring provides hardwood floor refinishing in Asheville, NC. Not every floor needs a full sand. Floors with light surface wear can often be buffed and recoated, while deep scratches, gray water damage, or a color change call for sanding to bare wood. Damaged boards may be replaced and blended in before finishing. Common requests for hardwood floor refinishing include water-based polyurethane finish, buffing out surface scratches, pet stain board replacement, sanding and refinishing oak floors and water damage board repair. Simon flooring is also listed for carpet installation and countertop installation. Gray or bare spots in traffic areas, deep scratches, and a finish that no longer repels water are common signs floors need refinishing. Mention pets, when the rooms can be fully emptied, and whether you prefer a water-based or oil-based finish, if known. Cost depends on square footage, floor condition, whether stain is applied, the number of finish coats, and any board repairs or stairs. Customers in Asheville and nearby areas such as Arden, Fletcher and Swannanoa can request a quote. To get started, send Simon flooring a request on Fixerlane with the details of your project.

Flooring near Asheville

Arden, NC (3 · 5.6 mi)Hendersonville, NC (6 · 12.9 mi)Greer, SC (5 · 37.7 mi)Inman, SC (9 · 41.1 mi)Boiling Springs, SC (5 · 45.8 mi)Greenville, SC (18 · 48.4 mi)Sevierville, TN (3 · 58.4 mi)Spartanburg, SC (7 · 58.9 mi)

Other services in Asheville

Cleaning (41)Handyman (37)Landscaping & Lawn Care (27)Construction & Contracting (27)Painting (18)Remodeling & Carpentry (15)Masonry & Concrete (14)Moving & Junk Removal (13)Roofing & Exterior (7)Electrical (7)Plumbing (6)Property Services (4)