An engineer with a tablet checking an air conditioning unit

7 near you

Find hvac in Flushing

Confirm your location to see pros near you.

HVAC pros near you

7 hvac pros serving Flushing, NY. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. Renovo Mechanical LLC

Flushing, NY21 years in business3 employees

Renovo Mechanical LLC provides furnace installation in Flushing, NY. The business has been operating for 21 years with a team of 3. Sizing is a key step that happens before any equipment is ordered. A load calculation looks at square footage, insulation, windows, and climate so the new furnace is neither too large nor too small. Oversized units short cycle and wear faster, while undersized ones struggle on cold days. On their profile, Renovo Mechanical LLC lists service needed: installation of heating systems, removal of heating systems and installation of ducts and vents; type of heating system: boiler; fuel source: natural gas, propane gas, oil and electricity; building height: single-level, two-story, three-story and high-rise. Renovations, additions, or a switch from oil or electric heat to gas are common reasons to plan a new furnace installation. Send photos of the current furnace, its data plate, and the surrounding area, including the vent pipe and any air conditioner coil above it. Venting changes, ductwork modifications, attic or tight-space installs, permit fees, and fuel conversions add labor and materials to the total. Posted hours are Monday to Sunday, 12:00 am to 11:59 pm. Request a quote from Renovo Mechanical LLC on Fixerlane and describe the job you need done.

2. Prime Heating and Cooling

Flushing, NY8 years in business3 employees

Prime Heating and Cooling provides furnace installation in Flushing, NY. A team of 3, the business has been operating for 8 years. Furnace installation involves removing the old unit, setting the new one, and connecting gas, electrical, venting, and ductwork. High-efficiency models also need a condensate drain and often new plastic venting. Once installed, the system is started, gas pressure and temperature rise are checked, and the thermostat is set up. Typical jobs for furnace installation in Flushing include variable-speed blower upgrades, electric furnace installation, thermostat replacement with a new furnace, attic furnace installation and gas line connection for furnaces. Prime Heating and Cooling is also listed for duct and vent cleaning. A furnace that is aging, needs frequent repairs, or requires an expensive part often leads homeowners to compare repair costs with a full replacement. Send photos of the current furnace, its data plate, and the surrounding area, including the vent pipe and any air conditioner coil above it. Venting changes, ductwork modifications, attic or tight-space installs, permit fees, and fuel conversions add labor and materials to the total. Accepted payment methods include Cash, Venmo and Zelle. Request a quote from Prime Heating and Cooling on Fixerlane and describe the job you need done.

3. C&h solutions ny

Flushing, NY6 years in business3 employees

C&h solutions ny provides central air conditioning installation in Flushing, NY. The business has been operating for 6 years with a team of 3. A frequent problem with new installs is poor sizing. A unit too large cycles on and off and leaves the house clammy, while one too small runs constantly. A room-by-room load calculation and a check of existing ductwork help match equipment to the home. On their profile, C&h solutions ny lists work needed: install new a/c units, replace existing a/c units and remove old a/c units; system type: split system; building height: single-level, two-story, three-story and high-rise; property type: house, condo or apartment, townhouse and business. An aging system that needs frequent repairs, uses an outdated refrigerant, or can no longer keep the house comfortable on hot days is the usual trigger for replacement. Share the home's square footage, number of stories, age of the current system, and photos of the outdoor unit data plate and indoor furnace or air handler. Electrical upgrades, permits, crane or attic access for the air handler, and removal of old equipment can add to an installation quote. Posted hours are Monday to Sunday, 12:00 am to 11:59 pm. Request a quote from C&h solutions ny on Fixerlane and describe the job you need done.

4. Prime hvac services corporation

Flushing, NY5 years in business2 employees

Based in Flushing, NY, Prime hvac services corporation works as a central air conditioning repair service. A team of 2, the business has been operating for 5 years. Central air repair addresses a system that runs but does not cool, will not start at all, or behaves erratically through the day. The technician checks electrical components, airflow, refrigerant pressures, and condensate drainage to find the failure, then repairs or replaces the specific part involved so cooling returns. Typical jobs for central air conditioning repair in Flushing include refrigerant leak detection, clogged condensate drain line, capacitor replacement, thermostat troubleshooting and contactor replacement. Prime hvac services corporation is also listed for TV mounting. Warm air from the vents, an outdoor unit that hums without the fan turning, or ice forming on the refrigerant lines usually means the system needs repair soon. Mention where the indoor unit sits, whether in an attic, closet, garage, or basement, along with access limits like a pull-down ladder or locked side gate. AC repair cost is driven mainly by which part failed, whether refrigerant must be recovered or added, and how accessible the indoor and outdoor equipment is. Posted hours are Monday to Sunday. Accepted payment methods include Apple Pay and Cash. To get started, send Prime hvac services corporation a request on Fixerlane with the details of your project.

5. Lanxin Tech Inc

Flushing, NY4 years in business

Based in Flushing, NY, Lanxin Tech Inc works as an HVAC contractor. It has been in business for 4 years. HVAC work covers the heating, cooling, and ventilation systems that keep a home comfortable, including furnaces, air conditioners, heat pumps, ductless units, ducts, and thermostats. Services range from seasonal maintenance and repairs to sizing and installing complete replacement systems for the whole house. Common requests for HVAC repair and installation include whole-home humidifier installation, full system replacement, refrigerant leak diagnosis, ductwork repair and sealing and central air conditioner repair. Homeowners also schedule HVAC work before peak seasons, when replacing an aging system, or when adding comfort to a finished basement or addition. Share the system type, brand, model number, and approximate age, plus photos of the indoor and outdoor units and data tags. Replacement pricing varies with system size and efficiency, heat pump versus furnace and air conditioner, ductwork changes, and thermostat or zoning upgrades. Accepted payment methods include Cash, Venmo and Zelle. Request a quote from Lanxin Tech Inc on Fixerlane and describe the job you need done.

6. MAXWELL

Flushing, NY3 years in business2 employees

MAXWELL provides furnace repair in Flushing, NY. A team of 2, the business has been operating for 3 years. Many furnace problems trace back to airflow or maintenance. A clogged filter can trip safety limits and shut the burners off, while a blocked condensate drain can stop a high-efficiency unit entirely. Repairs often pair the failed part with cleaning so the system runs reliably through the rest of the season. Typical jobs for furnace repair in Flushing include furnace not turning on, blower motor repair, inducer motor replacement, control board replacement and gas valve replacement. MAXWELL is also listed for duct and vent cleaning and handyman. Rooms that never reach the set temperature, or heating bills climbing without a change in use, can mean the furnace is struggling. Describe exactly what happens when heat is called, such as clicking, no response, or cold air, and when the problem started. Unit age, parts availability, difficult attic or crawlspace access, and calls outside regular business hours can all change the final repair price. Accepted payment methods include Cash, Credit card and Zelle. Request a quote from MAXWELL on Fixerlane and describe the job you need done.

7. Jungle HVAC Service

Flushing, NY1 year in business2 employees

Based in Flushing, NY, Jungle HVAC Service works as a central air repair technician. The business has been operating for 1 year with a team of 2. During hot stretches in Flushing, the most frequent repair calls involve iced-over coils, outdoor fans that will not spin, and water pooling near the indoor unit. Each symptom has several possible causes, and a repair visit narrows the list down with testing before any parts are ordered or replaced. Common requests for central air conditioning repair include contactor replacement, blower motor repair, clogged condensate drain line, frozen evaporator coil and noisy outdoor unit. Jungle HVAC Service is also listed for duct and vent cleaning, handyman and interior painting. Rattling, grinding, or repeated clicking noises from the condenser, along with a sudden jump in summer power bills, often lead homeowners to call for a repair visit. Mention where the indoor unit sits, whether in an attic, closet, garage, or basement, along with access limits like a pull-down ladder or locked side gate. AC repair cost is driven mainly by which part failed, whether refrigerant must be recovered or added, and how accessible the indoor and outdoor equipment is. To get started, send Jungle HVAC Service a request on Fixerlane with the details of your project.

HVAC elsewhere

Houston, TX (97)Orlando, FL (78)Miami, FL (75)Phoenix, AZ (71)Atlanta, GA (65)San Antonio, TX (60)Dallas, TX (59)Philadelphia, PA (58)

Other services in Flushing

Handyman (21)Cleaning (18)Construction & Contracting (18)Electrical (13)Plumbing (10)Painting (9)Moving & Junk Removal (7)Remodeling & Carpentry (5)Roofing & Exterior (4)Appliance Repair (3)