An engineer with a tablet inspecting reinforcing steel on a site

8 near you

Find masonry & concrete in Sandy

Confirm your location to see pros near you.

Masonry & Concrete pros near you

8 masonry & concrete pros serving Sandy, UT. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. Mo’betta Concrete & Tree Trimming

Sandy, UT19 years in business4 employees

Mo’betta Concrete & Tree Trimming is a concrete company serving Sandy, UT. A team of 4, the business has been operating for 19 years. A typical project starts with measuring and marking the area, then removing old material and grading so water drains away from the house. After the pour, control joints are cut or tooled to guide where cracks form, and the slab is left to cure before it carries foot or vehicle traffic. Typical jobs for concrete work in Sandy include driveway pouring, patio slabs, garage floor slabs, concrete curbing and sidewalk replacement. Crumbling steps, flaking surfaces, and slabs lifted by tree roots often mean patching is no longer practical and a new pour is the better option. Describe access for a concrete truck or wheelbarrows, including gate widths, slopes, overhead wires, and any landscaping that must be protected during the pour. Concrete pricing is shaped by square footage, slab thickness, the type of reinforcement used, and whether demolition and haul-off of old concrete are included. Besides Sandy, homeowners in Midvale, South Jordan and Draper can reach out for concrete work. Posted hours are Monday to Sunday, 12:00 am to 11:59 pm. To get started, send Mo’betta Concrete & Tree Trimming a request on Fixerlane with the details of your project.

2. Generations Deck Builders LLC

Sandy, UT12 years in business7 employees

Based in Sandy, UT, Generations Deck Builders LLC works as a deck contractor. The business has been operating for 12 years with a team of 7. Beyond new builds, deck contractors replace rotted boards, rebuild stairs, add railings, and extend existing decks. A site visit covers the yard slope, door threshold height, sun exposure, and how the deck will be used, whether for dining, grilling, a hot tub, or lounging. On their profile, Generations Deck Builders LLC lists project scope: remodel or renovation of existing decks or porches and new deck or porch construction; property type: residential and commercial. Posts sitting in standing water, a ledger pulling away from the house, or loose stairs are signs worth addressing quickly with a deck builder. Share the desired deck size, height from the ground, and photos of the yard and back of the house. Note where doors open onto the deck. A deck building estimate usually reflects deck size, height off the ground, and material choice more than anything else. Composite and tropical hardwood cost more than pressure-treated lumber. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Accepted payment methods include Cash, Check and Credit card. Request a quote from Generations Deck Builders LLC on Fixerlane and describe the job you need done.

3. Apex Concrete Cutting

Sandy, UT12 years in business4 employees

Apex Concrete Cutting is a concrete demolition service serving Sandy, UT. A team of 4, the business has been operating for 12 years. Removal is often more involved than it looks. Rebar and wire mesh must be cut, thick sections may need saw cutting to control breaks, and underground utilities have to be marked before digging so nothing buried is struck during demolition. On their profile, Apex Concrete Cutting lists concrete removal reason: concrete removal for access to water or sewer pipe, concrete removal for yard drainage, remove portion of driveway, walkway and or patio; property type: residential and commercial. Old hot tub pads, abandoned footings, and unused sidewalks often get removed to reclaim space for gardens or new construction. Mention whether rebar or mesh is present if known, and how equipment would reach the area through gates or driveways. Thick or heavily reinforced slabs, hand demolition in tight spaces, and long haul distances usually raise the price of removal. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Posted hours are Monday to Sunday, 6:00 am to 8:00 pm. Accepted payment methods include Apple Pay, Cash, Check, Credit card, Google Pay and PayPal. Request a quote from Apex Concrete Cutting on Fixerlane and describe the job you need done.

4. themillmfg

Sandy, UT6 years in business2 employees

Based in Sandy, UT, themillmfg works as a metal fabrication shop. The business has been operating for 6 years with a team of 2. Metal fabrication turns raw steel, aluminum, or stainless stock into finished parts by cutting, bending, drilling, and welding. Residential projects often include railings, gates, brackets, and decorative pieces, which are built in a shop and then installed or picked up. Common requests for metal fabrication include metal shelving and racks, mailbox posts and signs, decorative metal screens, equipment guards and trailer repairs and modifications. themillmfg is also listed for powder coating. Rust bleeding through paint, wobbly railing posts, and bent gate frames are signs that existing metalwork around the home needs repair or replacement. Describe how the item will be mounted, what it will attach to, and any weight it needs to support, along with photos of the installation area. On-site installation, powder coating or galvanizing, and design drawings for one-off pieces can add noticeably to the total price of a fabrication job. Besides Sandy, homeowners in Midvale, South Jordan and Draper can reach out for metal fabrication. Accepted payment methods include Cash, Check, PayPal and Venmo. To get started, send themillmfg a request on Fixerlane with the details of your project.

5. KB Concrete and Design

Sandy, UT5 years in business5 employees

Based in Sandy, UT, KB Concrete and Design works as a concrete company. The business has been operating for 5 years with a team of 5. Homeowners in Sandy usually bring in concrete work to replace a heaved sidewalk, widen a driveway, or add a patio for outdoor seating. The result is a durable surface built on a properly prepared base, with thickness and reinforcement matched to how the area will actually be used. Typical jobs for concrete work in Sandy include retaining wall footings, patio slabs, driveway pouring, garage floor slabs and stamped concrete patios. KB Concrete and Design is also listed for concrete removal. Adding a patio, expanding parking space for another vehicle, or preparing a level pad for a shed or hot tub usually starts with a concrete estimate. Include rough measurements of the area, photos from a few angles, and whether existing concrete needs to be broken out and hauled away first. Decorative finishes, site access for trucks or pumps, and the amount of grading or base preparation needed tend to move a concrete quote the most. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Accepted payment methods include Cash, Check, Credit card, Venmo and Zelle. To get started, send KB Concrete and Design a request on Fixerlane with the details of your project.

6. Faulkner Construction

Sandy, UT4 years in business

Based in Sandy, UT, Faulkner Construction works as a deck builder. It has been in business for 4 years. Beyond new builds, deck contractors replace rotted boards, rebuild stairs, add railings, and extend existing decks. A site visit covers the yard slope, door threshold height, sun exposure, and how the deck will be used, whether for dining, grilling, a hot tub, or lounging. Common requests for deck building include deck staining and sealing, deck stairs, deck expansions, railing installation and deck footing repair. Posts sitting in standing water, a ledger pulling away from the house, or loose stairs are signs worth addressing quickly with a deck builder. Mention material preference, railing style, stairs, and features like built-in benches, planters, or lighting. Include any HOA rules on decks. Railings, stairs, multiple levels, permits, and site conditions like steep slope or poor soil add to both labor and materials. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Posted hours are Monday to Friday, 7:00 am to 5:00 pm. Accepted payment methods include Check and Credit card. Request a quote from Faulkner Construction on Fixerlane and describe the job you need done.

7. Kaumai Concrete LLC

Sandy, UT2 years in business

Kaumai Concrete LLC is a concrete company serving Sandy, UT. The business has been operating for 2 years. Concrete contractors form, pour, and finish slabs, walkways, driveways, steps, and footings around the home. The work includes excavation, compacting a gravel base, setting forms and reinforcement, placing the concrete, and finishing the surface with a broom texture, smooth trowel, stamped pattern, or exposed aggregate look. Common requests for concrete work include cracked slab removal, garage floor slabs, stamped concrete patios, concrete curbing and sidewalk replacement. Kaumai Concrete LLC is also listed for concrete removal. Crumbling steps, flaking surfaces, and slabs lifted by tree roots often mean patching is no longer practical and a new pour is the better option. Mention the desired finish, such as broom, smooth, stamped, or exposed aggregate, and whether color, scoring patterns, or decorative borders are wanted. Concrete pricing is shaped by square footage, slab thickness, the type of reinforcement used, and whether demolition and haul-off of old concrete are included. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Posted hours are Monday to Saturday. Accepted payment methods include Cash, Check, Venmo and Zelle. To get started, send Kaumai Concrete LLC a request on Fixerlane with the details of your project.

8. Countryhand L.L.C

Sandy, UT1 year in business

Countryhand L.L.C is a concrete company serving Sandy, UT. It has been in business for 1 year. Concrete contractors form, pour, and finish slabs, walkways, driveways, steps, and footings around the home. The work includes excavation, compacting a gravel base, setting forms and reinforcement, placing the concrete, and finishing the surface with a broom texture, smooth trowel, stamped pattern, or exposed aggregate look. Common requests for concrete work include garage floor slabs, patio slabs, cracked slab removal, exposed aggregate walkways and driveway pouring. Countryhand L.L.C is also listed for concrete removal. Crumbling steps, flaking surfaces, and slabs lifted by tree roots often mean patching is no longer practical and a new pour is the better option. Include rough measurements of the area, photos from a few angles, and whether existing concrete needs to be broken out and hauled away first. Concrete pricing is shaped by square footage, slab thickness, the type of reinforcement used, and whether demolition and haul-off of old concrete are included. Customers in Sandy and nearby areas such as Midvale, South Jordan and Draper can request a quote. Posted hours are Monday to Friday, 6:00 am to 6:00 pm. To get started, send Countryhand L.L.C a request on Fixerlane with the details of your project.

Masonry & Concrete near Sandy

Draper, UT (8 · 5.1 mi)West Jordan, UT (12 · 6.5 mi)Riverton, UT (3 · 6.9 mi)Salt Lake City, UT (33 · 10 mi)Lehi, UT (9 · 11.1 mi)West Valley City, UT (14 · 11.3 mi)American Fork, UT (6 · 11.8 mi)Herriman, UT (7 · 13.8 mi)

Other services in Sandy

Handyman (35)Cleaning (35)Construction & Contracting (22)Landscaping & Lawn Care (16)Painting (10)Flooring (9)Electrical (9)Remodeling & Carpentry (9)Roofing & Exterior (8)Moving & Junk Removal (8)Plumbing (8)Property Services (4)