Fixerlane
An engineer with a tablet inspecting reinforcing steel on a site
3 near you

Find masonry & concrete in Syracuse

Confirm your location to see pros near you.

Masonry & Concrete pros near you

3 masonry & concrete pros serving Syracuse, UT. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. K&F Masonry and Concrete LLC

Syracuse, UT16 years in business7 employees

K&F Masonry and Concrete LLC provides concrete work in Syracuse, UT. A team of 7, the business has been operating for 16 years. Concrete contractors form, pour, and finish slabs, walkways, driveways, steps, and footings around the home. The work includes excavation, compacting a gravel base, setting forms and reinforcement, placing the concrete, and finishing the surface with a broom texture, smooth trowel, stamped pattern, or exposed aggregate look. Common requests for concrete work include stamped concrete patios, hot tub pads, garage floor slabs, patio slabs and shed foundations. K&F Masonry and Concrete LLC is also listed for concrete removal. Crumbling steps, flaking surfaces, and slabs lifted by tree roots often mean patching is no longer practical and a new pour is the better option. Include rough measurements of the area, photos from a few angles, and whether existing concrete needs to be broken out and hauled away first. Concrete pricing is shaped by square footage, slab thickness, the type of reinforcement used, and whether demolition and haul-off of old concrete are included. Customers in Syracuse and nearby areas such as Clearfield, Layton and Kaysville can request a quote. Accepted payment methods include Cash, Check and Zelle. Request a quote from K&F Masonry and Concrete LLC on Fixerlane and describe the job you need done.

2. Moalabrother Contraction

Syracuse, UT6 years in business4 employees

Based in Syracuse, UT, Moalabrother Contraction works as a concrete company. A team of 4, the business has been operating for 6 years. A typical project starts with measuring and marking the area, then removing old material and grading so water drains away from the house. After the pour, control joints are cut or tooled to guide where cracks form, and the slab is left to cure before it carries foot or vehicle traffic. Common requests for concrete work include patio slabs, exposed aggregate walkways, stamped concrete patios, driveway pouring and shed foundations. Moalabrother Contraction is also listed for concrete removal. Deep cracks, sunken sections, trip hazards between panels, and water pooling against the foundation are common reasons homeowners decide to replace old concrete. Mention the desired finish, such as broom, smooth, stamped, or exposed aggregate, and whether color, scoring patterns, or decorative borders are wanted. Decorative finishes, site access for trucks or pumps, and the amount of grading or base preparation needed tend to move a concrete quote the most. Besides Syracuse, homeowners in Clearfield, Layton and Kaysville can reach out for concrete work. Request a quote from Moalabrother Contraction on Fixerlane and describe the job you need done.

3. hamberger welding

Syracuse, UT2 years in business

Based in Syracuse, UT, hamberger welding works as a metal fabrication shop. The business has been operating for 2 years. A fabrication project usually moves from measurements and a drawing to material selection, cutting, fitting, and welding. Finishing may include grinding welds smooth, then painting, powder coating, or galvanizing the piece before it is installed on site or picked up from the shop. Common requests for metal fabrication include custom steel railings, mailbox posts and signs, decorative metal screens, stair stringers and equipment guards. hamberger welding is also listed for junk removal. Homeowners typically contact a fabricator for a custom railing, a gate that fits an unusual opening, or a repair to a cracked weld or rusted metal part. Mention the desired finish, such as paint, powder coat, or bare stainless, and whether on-site installation or shop pickup is needed. On-site installation, powder coating or galvanizing, and design drawings for one-off pieces can add noticeably to the total price of a fabrication job. Besides Syracuse, homeowners in Clearfield, Layton and Kaysville can reach out for metal fabrication. Accepted payment methods include Cash, Venmo and Zelle. Request a quote from hamberger welding on Fixerlane and describe the job you need done.

Masonry & Concrete near Syracuse

Other services in Syracuse