Fixerlane
An engineer with a tablet checking an air conditioning unit
12 near you

Find hvac in Tacoma

Confirm your location to see pros near you.

HVAC pros near you

12 hvac pros serving Tacoma, WA. Compare experience, team size and the work they do, then contact them directly — Fixerlane never charges customers.

Top pros for your project

1. Mercurio's Heating & Air Conditioning

Tacoma, WA33 years in business100 employees

Mercurio's Heating & Air Conditioning provides central air conditioning installation in Tacoma, WA. The business has been operating for 33 years with a team of 100. An installation visit often starts with removing the old condenser and coil, recovering refrigerant, and preparing the pad. The crew then sets new equipment, brazes line connections, confirms the thermostat works, and walks the homeowner through filters and basic care. Common requests for central air conditioning installation include replacing an old condenser and coil, load calculations for system sizing, ductwork modifications for cooling, condensate drain and pump installation and heat pump installation. Mercurio's Heating & Air Conditioning is also listed for duct and vent cleaning. Homes in Tacoma without central air, or with window units in every room, often add a ducted system when there is existing ductwork from a furnace. Include preferences on efficiency level, heat pump versus AC only, and any electrical panel photos, since new equipment may need a dedicated circuit. Equipment size and efficiency level, whether ductwork needs changes, and the complexity of line set routing are the main factors in central AC pricing. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday to Saturday, 7:00 am to 7:00 pm. Accepted payment methods include Cash, Check and Credit card. To get started, send Mercurio's Heating & Air Conditioning a request on Fixerlane with the details of your project.

2. Superior Air Services

Tacoma, WA27 years in business4 employees

Based in Tacoma, WA, Superior Air Services works as a central air installer. A team of 4, the business has been operating for 27 years. A frequent problem with new installs is poor sizing. A unit too large cycles on and off and leaves the house clammy, while one too small runs constantly. A room-by-room load calculation and a check of existing ductwork help match equipment to the home. Common requests for central air conditioning installation include new central AC system installs, heat pump installation, adding AC to a furnace system, evaporator coil installation and smart thermostat setup with new AC. Superior Air Services is also listed for garbage disposal installation and handyman. An aging system that needs frequent repairs, uses an outdated refrigerant, or can no longer keep the house comfortable on hot days is the usual trigger for replacement. Include preferences on efficiency level, heat pump versus AC only, and any electrical panel photos, since new equipment may need a dedicated circuit. Equipment size and efficiency level, whether ductwork needs changes, and the complexity of line set routing are the main factors in central AC pricing. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday to Friday, 8:00 am to 6:00 pm. Accepted payment methods include Cash, Check, Credit card, PayPal, Venmo and Zelle. To get started, send Superior Air Services a request on Fixerlane with the details of your project.

3. Hunt's Services

Tacoma, WA14 years in business70 employees

Based in Tacoma, WA, Hunt's Services works as a central air installer. A team of 70, the business has been operating for 14 years. An installation visit often starts with removing the old condenser and coil, recovering refrigerant, and preparing the pad. The crew then sets new equipment, brazes line connections, confirms the thermostat works, and walks the homeowner through filters and basic care. Common requests for central air conditioning installation include heat pump installation, load calculations for system sizing, old unit removal and disposal, condensate drain and pump installation and smart thermostat setup with new AC. Hunt's Services is also listed for duct and vent cleaning, garbage disposal installation, garbage disposal repair and plumbing inspection. An aging system that needs frequent repairs, uses an outdated refrigerant, or can no longer keep the house comfortable on hot days is the usual trigger for replacement. Include preferences on efficiency level, heat pump versus AC only, and any electrical panel photos, since new equipment may need a dedicated circuit. Electrical upgrades, permits, crane or attic access for the air handler, and removal of old equipment can add to an installation quote. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday to Friday, 7:00 am to 2:00 pm. Accepted payment methods include Cash and Credit card. To get started, send Hunt's Services a request on Fixerlane with the details of your project.

4. hearth and stone

Tacoma, WA14 years in business27 employees

hearth and stone provides fireplace repair in Tacoma, WA. A team of 27, the business has been operating for 14 years. A repair visit usually starts with an inspection of the firebox, damper, smoke chamber, and flue, and for gas units, the ignition system and controls. Once the problem is identified, the damaged parts are rebuilt or replaced and the unit is tested to confirm it draws properly and operates cleanly. On their profile, hearth and stone lists fireplace or chimney services needed: fireplace repair, chimney repair, chimney cleaning and fireplace cleaning; fireplace type: wood; fireplace material: brick, stone or concrete, metal, wood and plaster; building height: singe-level, two-story, three-story and high-rise. Crumbling mortar, water stains around the chimney, or chunks of masonry falling into the firebox often lead homeowners to schedule repairs. For gas units, photograph the data plate, usually found behind the lower grille or access panel, so the brand and model can be identified. Fireplace repair pricing depends on the type of unit, how extensive the masonry or component damage is, and whether parts are readily available. Besides Tacoma, homeowners in Fife, Lakewood and Milton can reach out for fireplace repair. To get started, send hearth and stone a request on Fixerlane with the details of your project.

5. Tacoma Furnace

Tacoma, WA10 years in business4 employees

Based in Tacoma, WA, Tacoma Furnace works as a central air conditioning repair service. The business has been operating for 10 years with a team of 4. Diagnosis typically starts at the thermostat, moves to the indoor air handler and filter, and finishes at the outdoor condenser. Readings taken at each point help separate a simple fix, like a failed capacitor or clogged drain, from a larger problem such as a refrigerant leak or a compressor fault. Common requests for central air conditioning repair include condenser fan motor repair, frozen evaporator coil, compressor diagnosis, AC not cooling diagnosis and noisy outdoor unit. Rattling, grinding, or repeated clicking noises from the condenser, along with a sudden jump in summer power bills, often lead homeowners to call for a repair visit. Mention where the indoor unit sits, whether in an attic, closet, garage, or basement, along with access limits like a pull-down ladder or locked side gate. System age, part availability for the specific model, and whether the visit falls on evenings or weekends are the usual factors behind a repair quote. Besides Tacoma, homeowners in Fife, Lakewood and Milton can reach out for central air conditioning repair. Posted hours are Monday to Friday, 8:00 am to 6:00 pm. Accepted payment methods include Cash, Check, Credit card and Zelle. To get started, send Tacoma Furnace a request on Fixerlane with the details of your project.

6. Fuse Service Tacoma

Tacoma, WA8 years in business5 employees

Fuse Service Tacoma provides central air conditioning repair in Tacoma, WA. A team of 5, the business has been operating for 8 years. Diagnosis typically starts at the thermostat, moves to the indoor air handler and filter, and finishes at the outdoor condenser. Readings taken at each point help separate a simple fix, like a failed capacitor or clogged drain, from a larger problem such as a refrigerant leak or a compressor fault. Common requests for central air conditioning repair include clogged condensate drain line, thermostat troubleshooting, blower motor repair, compressor diagnosis and refrigerant leak detection. Fuse Service Tacoma is also listed for duct and vent cleaning. Warm air from the vents, an outdoor unit that hums without the fan turning, or ice forming on the refrigerant lines usually means the system needs repair soon. Describe exactly what the system is doing, such as blowing warm air or refusing to turn on, and note the thermostat setting and any displayed error codes. AC repair cost is driven mainly by which part failed, whether refrigerant must be recovered or added, and how accessible the indoor and outdoor equipment is. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday, 8:00 am to 8:00 pm. To get started, send Fuse Service Tacoma a request on Fixerlane with the details of your project.

7. Nates Home Services

Tacoma, WA4 years in business

Based in Tacoma, WA, Nates Home Services works as a whole house fan installation service. It has been in business for 4 years. Whole house fans pull outside air in through open windows and push warm indoor air up into the attic, where it exits through roof and gable vents. Installation involves cutting a ceiling opening in a hallway, framing it between joists, mounting the fan, and wiring it to a wall switch or timer. Typical jobs for attic and whole house fan installation in Tacoma include whole house fan installation, gable vent fan installation, insulated fan door covers, ceiling cutout and framing and replacing noisy attic fans. Nates Home Services is also listed for TV mounting and wiring installation. Mild evenings that stay warm indoors are a good fit for a whole house fan, which draws in cooler outside air in Tacoma homes. Note whether the goal is cooling the living space or venting the attic, and which hallway or ceiling location is preferred for a fan. Adding attic vents, insulated covers, or smart controls increases the price, as does working in cramped or low-clearance attics during hot weather. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday to Friday, 8:00 am to 4:00 pm. Accepted payment methods include Cash, Check, Google Pay, PayPal and Venmo. Request a quote from Nates Home Services on Fixerlane and describe the job you need done.

8. Four Seasons Comfort INC

Tacoma, WA3 years in business4 employees

Four Seasons Comfort INC provides furnace installation in Tacoma, WA. A team of 4, the business has been operating for 3 years. Furnace installation involves removing the old unit, setting the new one, and connecting gas, electrical, venting, and ductwork. High-efficiency models also need a condensate drain and often new plastic venting. Once installed, the system is started, gas pressure and temperature rise are checked, and the thermostat is set up. Typical jobs for furnace installation in Tacoma include gas furnace replacement, furnace and AC system replacement, return air upgrades, thermostat replacement with a new furnace and condensate drain installation. A furnace that is aging, needs frequent repairs, or requires an expensive part often leads homeowners to compare repair costs with a full replacement. Share the home's square footage, age, number of stories, and any rooms that are consistently too hot or too cold. Furnace efficiency, capacity, and blower type are the largest price factors, along with the brand and whether the air conditioner is replaced too. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Accepted payment methods include Cash, Check and Credit card. To get started, send Four Seasons Comfort INC a request on Fixerlane with the details of your project.

9. Aakool heating and cooling

Tacoma, WA3 years in business

Aakool heating and cooling provides central air conditioning repair in Tacoma, WA. It has been in business for 3 years. During hot stretches in Tacoma, the most frequent repair calls involve iced-over coils, outdoor fans that will not spin, and water pooling near the indoor unit. Each symptom has several possible causes, and a repair visit narrows the list down with testing before any parts are ordered or replaced. Typical jobs for central air conditioning repair in Tacoma include contactor replacement, noisy outdoor unit, short cycling problems, frozen evaporator coil and clogged condensate drain line. Warm air from the vents, an outdoor unit that hums without the fan turning, or ice forming on the refrigerant lines usually means the system needs repair soon. Take a photo of the outdoor unit data plate and the indoor unit label so the brand, model, and approximate age are known before anyone arrives. System age, part availability for the specific model, and whether the visit falls on evenings or weekends are the usual factors behind a repair quote. Besides Tacoma, homeowners in Fife, Lakewood and Milton can reach out for central air conditioning repair. Accepted payment methods include Cash, Check, Credit card, Samsung Pay, Square cash app and Zelle. Request a quote from Aakool heating and cooling on Fixerlane and describe the job you need done.

10. Dynamic Services

Tacoma, WA3 years in business

Dynamic Services provides central air conditioning repair in Tacoma, WA. It has been in business for 3 years. During hot stretches in Tacoma, the most frequent repair calls involve iced-over coils, outdoor fans that will not spin, and water pooling near the indoor unit. Each symptom has several possible causes, and a repair visit narrows the list down with testing before any parts are ordered or replaced. Typical jobs for central air conditioning repair in Tacoma include condenser fan motor repair, capacitor replacement, thermostat troubleshooting, noisy outdoor unit and refrigerant leak detection. Short cycling, rising humidity indoors, and water leaking near the furnace or air handler are common early signs that an air conditioning system has a problem. Describe exactly what the system is doing, such as blowing warm air or refusing to turn on, and note the thermostat setting and any displayed error codes. System age, part availability for the specific model, and whether the visit falls on evenings or weekends are the usual factors behind a repair quote. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Accepted payment methods include Apple Pay, Cash, Check, Credit card, PayPal and Stripe. To get started, send Dynamic Services a request on Fixerlane with the details of your project.

11. Best Heat & Air

Tacoma, WA1 year in business4 employees

Best Heat & Air provides central air conditioning installation in Tacoma, WA. A team of 4, the business has been operating for 1 year. A frequent problem with new installs is poor sizing. A unit too large cycles on and off and leaves the house clammy, while one too small runs constantly. A room-by-room load calculation and a check of existing ductwork help match equipment to the home. Common requests for central air conditioning installation include heat pump installation, replacing an old condenser and coil, load calculations for system sizing, ductwork modifications for cooling and electrical disconnect installation. Rising summer power bills, uneven cooling between floors, and a condenser that is rusted or noisy are also signs it may be time for new equipment. Share the home's square footage, number of stories, age of the current system, and photos of the outdoor unit data plate and indoor furnace or air handler. Equipment size and efficiency level, whether ductwork needs changes, and the complexity of line set routing are the main factors in central AC pricing. Besides Tacoma, homeowners in Fife, Lakewood and Milton can reach out for central air conditioning installation. Posted hours are Monday to Sunday. Accepted payment methods include Cash, Check, Credit card, Google Pay, Samsung Pay and Stripe. To get started, send Best Heat & Air a request on Fixerlane with the details of your project.

12. Lapin Heating and Cooling

Tacoma, WA1 year in business

Based in Tacoma, WA, Lapin Heating and Cooling works as a central air conditioning installation company. It has been in business for 1 year. A frequent problem with new installs is poor sizing. A unit too large cycles on and off and leaves the house clammy, while one too small runs constantly. A room-by-room load calculation and a check of existing ductwork help match equipment to the home. Typical jobs for central air conditioning installation in Tacoma include new central AC system installs, condensate drain and pump installation, ductwork modifications for cooling, air handler replacement and load calculations for system sizing. Homes in Tacoma without central air, or with window units in every room, often add a ducted system when there is existing ductwork from a furnace. Include preferences on efficiency level, heat pump versus AC only, and any electrical panel photos, since new equipment may need a dedicated circuit. Electrical upgrades, permits, crane or attic access for the air handler, and removal of old equipment can add to an installation quote. Customers in Tacoma and nearby areas such as Fife, Lakewood and Milton can request a quote. Posted hours are Monday to Sunday, 7:00 am to 11:59 pm. Accepted payment methods include Cash, Check, Credit card, PayPal, Square cash app and Venmo. Request a quote from Lapin Heating and Cooling on Fixerlane and describe the job you need done.

HVAC near Tacoma

Other services in Tacoma